New 12 Week Physique Cycle – Begins 6/15

Beginning 6/15, the next 12 weeks of Physique training will consist of:

1-week deload (introduction to metabolite phase)
5-week Metabolite Phase
1-week deload (introduction to strength phase)
5-week Strength Phase

All of this will be discussed in more detail below, but first some science:

Three Pathways to Muscle Growth

Mechanical Tension – This is the actual tension applied to muscles. You are winning if you consistently provide overload over time. Not session to session, but that you are getting stronger for more reps over months and years. Evidence has shown, beyond a doubt, that it is the primary driver of muscle growth. The best way we currently know how to ensure progress over time is to get stronger on conventional movements with straight sets.

Metabolic Stress (Metabolite Training) – This has been shown to have SOME impact on muscle growth, though significantly less than mechanical tension. This is all about getting a pump, accumulating lactic acid, doing supersets, drop sets, giant sets, myo-reps, and other techniques that make you want to throw up.

Muscle Damage – Most studies actually demonstrate that muscle damage is counterproductive to muscle growth. But the damage is a result of training hard and providing overload. The caution here is just to avoid chasing muscle damage or using DOMS as a sign that you had a successful workout. If you constantly change training, you will constantly get sore, but that doesn’t mean you are increasing mechanical tension over time.

Many people believe that hypertrophy training and Metabolite Training are the same thing (that hypertrophy requires the constant use of supersets and other lactic burn techniques). It’s important to provide clarification here.

Proper hypertrophy training is composed of multiple mesocycles in succession where there is a focus on progressing volume and intensity over time on the big lifts. Longer rest periods, minimal metabolite work, and focus on minimizing variables to optimize adaptations. This is how you drive mechanical tension over time (after all, mechanical tension is clearly the thing that most accurately correlates with muscle growth).

Now that we know that Metabolite training is just a PHASE in a training year, here are some more details:

Examples of Metabolite Training

1. Supersets – Two movements back to back without rest. This could be similar muscle groups (Squats to Lunges) or it could be antagonistic muscle groups (Bench press to Bentover Row)

2. Drop Sets – One movement performed for multiple sets by decreasing the weight set to set (Lateral Raises with 30 lbs, then 20 lbs, then 10 lbs)

3. Giant Sets – Three or more movements back to back (can be same or varying muscle groups)

4. Myo Reps – This is a version of “Rest/pause” reps. You will do a hard set of 8-15 Reps, and then complete multiple “mini-sets of 2-4 reps” with 10-20 seconds rest between each mini-set

5. Pre-Exhaustion – This is taking an isolation movement and then supersetting it with a compound movement. Moving from DB flies directly to Bench Press would fatigue the pecs further.

6. “Rep Target” sets – This is one of my personal faves. Assume target reps are 60, start with a weight you can do for 15-20 Reps, and then chip away in sets of 6-10 reps the rest of the way until you hit 60 reps. I really like these because they are also trackable and can be progressed by volume very easily (increasing rep targets; a little foreshadowing for the new cycle)

Cautions of Metabolite Training

1. Achieving the “Pump” – The entire goal of metabolite work is to achieve pumps like you never have before. Most people find that when the pumps start to dissipate or decrease, the effectiveness of the metabolite cycle is nearing its end. Just be aware of this on a general level since it seems to happen after 4-6 weeks of consistent use in programming.

2. Slow-Twitch Conversion – This type of training is similar to lactic threshold training from the aerobic world. It has been shown that the body becomes so efficient at clearing lactic acid, that the effectiveness of the protocol actually diminishes due to some conversion of fast-twitch to slow-twitch fibers. This is great news if you wanna be an endurance athlete, but far from ideal for a strength sport, or those looking to build muscle.

3. Psychological Impact – Metabolite training is brutally difficult. There is a significant amount of mental preparation that goes into getting amped up and excited to feel this kind of pain in each session. Creating this level of excitement is taxing and will cause an increase in cortisol. I always look forward to these phases, and then as soon as I’m in the middle of a 60-Rep Lunge set, I wonder why. This then compounds over time, at which point I generally move to the next phase of training

What Comes Next?

After the Metabolite phase, the proper “next step” in the periodization of a year is to complete a 5-week lower volume STRENGTH phase.

There are a few reasons for this:

1. The metabolite phase is the pinnacle of hypertrophy training. It’s like the icing on top. While you could go back to another hypertrophy phase, I tend to believe there is an additional benefit in re-sensitizing the body to the stimulus by embarking on a lower volume strength phase.

2. Strength phases are most effective with lower volumes. This is due to the higher intensity (loads closer to 1-RM) that tax the CNS in a different way than hypertrophy work. Therefore, it is the perfect time to work on strength AND also take a much-needed break from the hypertrophy stimulus.

3. It is often said that the strength phase can potentiate further progress. It is unknown exactly how, though the theories state that the body needs phases of maintenance level volumes as a means of “cementing” the gains it has made. Much like we take a deload week every 4-6 weeks, this strength phase acts as a “deload mesocycle” in the perspective of the training YEAR.

—–

 

Summer 2020 Paragon Physique (Part 2; The STRENGTH Phase)

On the heels of the metabolite training block, we now embark on the strength phase. Any athlete who has been training with a high level of intensity and volume would benefit substantially from implementing this short-term change in protocol.

Steve Hall coined this block of training as a “Primer Phase,” and I think that this is a perfect way of describing it. It will literally PRIME your body for more gains in the future, where continuing to do the same thing would cause some issues. Two of these concerns are:

Psychological Impact – Metabolite training is really difficult. Completing circuits of movements with short rest, close to failure, is a painful way to train. There is mental angst associated with it, as well as a general level of “excitement” that is needed to get amped up. The Low rep strength block will allow you lengthy rest periods and lots of recovery!

Muscle-Fiber Conversion – Metabolite training is similar to lactic threshold training from the aerobic world (or Functional Fitness circuits; highly glycolytic). It has been shown that the body becomes so efficient at clearing lactic acid, that the effectiveness of the protocol actually diminishes due to some conversion of fast-twitch to slow-twitch fibers. This is far from ideal for a strength/hypertrophy objective. Therefore, switching to a program that is dominated by fast-twitch style strength work will help your muscle-fibers convert back to those strong muscle-building fibers that we want!

Benefits of the Strength Phase

1. Flush Fatigue – If a DELOAD is a one-week period that flushes fatigue to optimize performance, this strength phase is a deload week on steroids. The difference is that a deload week means light weights. This strength phase is composed of heavy lifting with low reps; where the intention is to deload only volume and the rep target range for a month.

2. Re-sensitizing Muscle Tissue – Volume tolerance is a real thing (adaptive resistance). It would be great if we could just keep accruing more volume forever. But sessions would get really long and fatigue would get really high. So instead we do deload weeks and strength phases to make sure that the body is PRIMED and RESPONSIVE to volume for the next cycle of training.

3. Nutrition –The amount of energy expenditure in the strength phase is low and doesn’t really require any specific fuel source aside from ample Protein. If you were bulking and would like to take a break back to maintenance or do a short cut, this would be a great time. If you have been dieting really hard and have some built up diet fatigue, you may want to consider bringing calories back up to maintenance.

More Details of the Strength Cycle

– Total length of 6 weeks (intro “deload” week followed by 5 weeks of accumulation)
– Training 4x/week; mostly compound movements
– Generally between 2-6 Rep sets for big compounds and 6-12 Reps for smaller compounds
– Longer rest periods but fewer total work sets (similar 60-75 min work time)

What Comes Next?

This strength phase can be considered both the end of the training year and the beginning of the next training year. It is flushing the fatigue from the prior work and setting you up for a successful year progress!

That means that we now start a brand new year of training. You can expect a lot of classic Physique-style programming:

The following cycles will be much more “well-rounded” than the extremes of focusing exclusively on strength or metabolite. The next training cycles will consist of some strength, a lot of hypertrophy, and a small dose of metabolite work.

It’s gonna be an awesome year, and I’m so glad you guys are training with us!

If you’re an existing member wishing to hop on the new Physique cycle, shoot us an email to switch over your membership. Want to slide in on the fun? Join us by clicking here.